Use the W6100

W6100 Registers

Bit 3:1 for Control Register

Bit [3:1]
000	Write single Transfer
001	Write Burst Transfer
010	Write MR Register
011	RESERVED
100	Read Single Transfer
101	Read Burst Transfer
110	Read MR Register
111	RESERVED

Control Register

Bit	Description
0	Enable - 0: Block is disabled - 1: Block is Enabled
1	See Above for value
2	See Above for value
3	See Above for value
4	Reset FIFOs
5	Start Transfer
6	Enable FIFO Empty/FIFO Full Interrupt
7	Transfer in Progress

W6100 Registers

Address	R	Read Description	W	Write Description
$F018C0	RW	Control Register
$F018C1	RW	MR VAlue
$F018C2
$F018C3	RW	Single Access Port
$F018C4	RW	WizNet Address Lo
$F018C5	RW	WizNet Address Hi
$F018C6	R	Rx FIFO Quanity Lo	W	WizNet Transfer Size Lo
$F018C7	R	Rx FIFO Quanity Hi	W	WizNet Transfer Size Hi
$F018C8	RW	FIFO Port